Braun Electric Shaver 4875 User Manual

SmartControl3  
4875  
washable  
Type 5742  
 
3
 
4
 
English  
Our products are designed to meet the  
highest standards of quality, functionality and  
design. We hope you enjoy your new Braun  
Shaver.  
• The red low-charge light glows when the  
shaver capacity has dropped below 20%  
provided the shaver is switched on. The  
remaining capacity will then be sufficient  
for 2 to 3 shaves.  
Warning  
• If the rechargeable batteries are discharg-  
ed, you may also shave by connecting the  
shaver to an electrical outlet via the special  
cord set.  
Your shaver is provided with a special cord set  
with integrated Safety Extra Low Voltage  
power supply. Do not exchange or manipulate  
any part of it. Otherwise there is risk of electric  
shock.  
Shaving  
Press the on/off switch (4) to turn the shaver  
on.  
Description  
1 Shaver foil  
2 Cutter block  
3 Release button  
4 On/off switch («start/stop»)  
5 Long hair trimmer  
6 Charging light (green)  
7 Low-charge light (red)  
8 Special cord set  
Trimmer:  
When the long hair trimmer (5) is activated, it  
allows the controlled trimming of moustache  
or sideburns.  
Tips for the perfect shave  
• We recommend that you shave before  
washing, as the skin tends to be slightly  
swollen after washing.  
• Hold the shaver at right angles (90°) to the  
skin. Stretch the skin and shave against  
the direction of beard growth.  
• To maintain 100% shaving performance,  
replace the shaver foil and cutter block at  
least every 18 months or when worn.  
Charging  
The best environmental temperature for  
charging is between 15 °C and 35 °C.  
• Connect the shaver to an electrical outlet  
with the motor switched off.  
• When charging for the first time, leave the  
shaver to charge continuously for 4 hours.  
• The green charging light (6) shows that  
the shaver is being charged. When the  
batteries are fully charged, the charging  
light intermittently blinks on and off. This  
indicates that the battery maintains its full  
capacity.  
• Once the shaver is completely charged,  
discharge the shaver through normal use.  
Then recharge to full capacity. Subsequent  
charges will take about 1 hour.  
• A full charge provides up to 40 minutes of  
cordless shaving time depending on your  
beard growth. However, the maximum  
battery capacity will only be reached after  
several charging/discharging cycles.  
Cleaning  
This appliance is suitable for cleaning  
under an open water tap.  
Warning: Detach the hand-held part  
from the power supply before cleaning it in  
water.  
Regular cleaning ensures better shaving  
performance. Rinsing the shaving head after  
each shave under running water is an easy  
and fast way to keep it clean:  
• Switch the shaver on (cordless) and rinse  
the shaving head under hot running water.  
5
 
A natural based soap may also be used  
provided it contains no particles or  
Environmental notice  
abrasive substances. Rinse off all foam and  
let the shaver run for a few more seconds.  
• Next, switch off the shaver and press the  
release buttons. Remove the shaver foil  
and the cutter block. Then leave the  
disassembled shaving parts to dry.  
This product contains rechargeable  
batteries. In the interest of protecting  
the environment, please do not dispose  
of the product in the household waste  
at the end of its useful life. Disposal can  
take place at a Braun Service Centre or at  
appropriate collection points provided in  
your country.  
Alternatively, you may clean the shaver using  
the brush provided:  
• Switch off the shaver. Remove the shaver  
foil.  
Subject to change without notice.  
• Using the brush, clean the cutter block and  
the inner area of the shaver head. However,  
do not clean the shaver foil with the brush  
as this may damage the foil.  
This product conforms to the European  
Directives EMC 89/336/EEC and Low  
Voltage 73/23/EEC.  
Keeping your shaver in top shape  
For electric specifications, see printing on the  
special cord set.  
About every four weeks, clean the cutter block  
with Braun cleaning agents. Put a drop of light  
machine oil onto the long hair trimmer and the  
shaver foil.  
Preserving the batteries  
In order to maintain the optimum capacity  
of the rechargeable batteries, the shaver  
has to be fully discharged (by shaving) every  
6 months approximately. Then recharge the  
shaver to full capacity. Do not expose the  
shaver to temperatures higher than 50 °C for  
extended periods of time.  
Replacing the shaving parts  
To maintain 100% shaving performance  
replace your foil and cutter block at least every  
18 months or when worn. Change both parts  
at the same time for a closer shave with less  
skin irritation.  
(Shaver foil and cutter block: 4000 series)  
5-742-463/01/VI-07  
Korea/GB  
6
 

Belkin Computer Hardware F5U502 User Manual
Black Decker Cordless Sander BDERO100 User Manual
Blanco Indoor Furnishings 157 142 User Manual
Bogen Cassette Player CPT 1B User Manual
Bosch Appliances Clothes Dryer WTMC5521 User Manual
Britax Car Seat ISOFIX User Manual
Bryant Air Conditioner 342 User Manual
Cabletron Systems Switch CSX500 User Manual
Cateye Home Safety Product ABS 10 User Manual
Celestron Telescope 52260 User Manual