Casio Watch 1935 1 User Manual

1934/1935-1  
GENERAL GUIDE  
If the digital display of your watch is continually changing, see “AUTO DISPLAY FUNCTION” for information on how to stop it.  
The operational procedures for Module 1934 and 1935 are identical. All of the illustrations in this manual show Module 1934.  
Press D to change from mode to mode.  
Module 1935 has a display with white figures on a black background.  
Timekeeping Mode  
Data Bank Mode  
Alarm Mode  
Stopwatch Mode  
Press D.  
[Module 1935]  
[Module 1934]  
To select a city code  
1. In the Timekeeping Mode, hold down B for about two seconds to display the Dual  
Time screen.  
TIMEKEEPING MODE  
In the Timekeeping Mode you can view the current time and current date for your  
home time zone, as well as the current time in one other time zone.  
The Dual Time screen is the one with the DUAL indicator.  
If you want to change the Home Time city code, display the Home Time screen  
instead of the Dual Time screen.  
Home Time  
Hour : Minutes  
Dual Time  
City Code  
Date  
2. Hold down C until the city code starts to flash.  
3. Use A and B to scroll through the city codes until you find the one you want to set.  
B scrolls forward, while A scrolls back through city codes. Holding down either  
button scrolls through the city codes at high speed.  
Month - Day  
Seconds  
Day of week  
See the “CITY CODE TABLE” at the back of this manual for a complete list of  
available codes.  
4. After you select a city code, press C to return to the Timekeeping Mode.  
To switch between standard time and daylight saving time  
Daylight Saving Time (DST), which is also sometimes called “summer time,” advanc-  
es the time for one hour, as is the custom in some areas during the summer. Remem-  
ber that not all countries or even local areas use Daylight Saving Time.  
DUAL indicator  
DATE indicator  
1. In the Timekeeping Mode, use B to display the time screen (Home Time or Dual  
Time) whose Daylight Saving Time setting you want to change.  
2. Hold down C until the city code starts to flash.  
You can separately specify one of 40 cities around the world for your Home Time  
and Dual Time. See the “CITY CODE TABLE” at the back of this manual for a list of  
available time zones.  
To switch between the Home Time and Dual Time screens, hold down B for about  
two seconds. The DUAL indicator remains on the display in all modes while the  
Dual Time screen is selected.  
Pressing B while the Home Time screen is on the display shows the city code of  
the Dual Time, followed by the current time in that city. After a few moments, the  
display changes back to the Home Time Screen. Pressing B while the Dual Time  
screen is on the display momentarily shows the Home Time city code and then  
time.  
To display the Date screen, press C. The Home Time date appears if C is pressed  
while the Home Time screen is displayed, while the Dual Time date appears if C is  
pressed while the Dual Time screen is displayed. In either case, the display changes  
back to the time screen after a few moments.  
3. Use D to select the DST On/Off setting.  
DST indicator  
The DST indicator flashes along with the current on ( )/  
AN  
(
)
off  
setting.  
Af  
4. Press B to toggle Daylight Saving Time on and off.  
5. After you are finished making the setting you want, press  
C to return to the Timekeeping Mode.  
The DST indicator appears on the display to indicate  
that daylight saving time is turned on.  
The daylight saving time setting you make is applied  
only to the time (Home Time or Dual Time) whose screen  
is on the display when you start the above procedure.  
You have to make separate settings for Home Time and  
Dual Time.  
Whenever you enter the Timekeeping Mode, the display first shows the city code  
(for either the Home Time or Dual Time, depending on what screen was on the  
display the last time you left the Timekeeping Mode), and then the current time in  
that city.  
DATA BANK MODE  
Mode indicator  
The Data Bank Mode lets you store up to 30 pairs of name  
and telephone number data. Data is automatically sorted  
based on the characters of the name. You can recall data  
by scrolling through it on the display.  
To set the time and date  
Times and dates are linked, so changing the setting for any time zone (city) automat-  
ically changes the setting for all other time zones. The following time and date setting  
procedure is explained using the Home Time screen, but you can also change set-  
tings using the Dual Time screen. See “To select a city code” for details on selecting  
a time zone for the Home Time and Dual Time screens.  
See the “CHARACTER LIST” at the back of this manual  
for details on how the watch sorts data.  
The Remaining Memory Screen appears when there is  
no data stored in memory, or when you scroll to the lo-  
cation between the last and the first data items stored in  
memory.  
City Code  
1. In the Timekeeping Mode, hold down B until the Home  
Time Screen appears.  
The name screen of the data item on the display when  
you exit the Data Bank Mode appears first the next time  
you enter the Data Bank Mode.  
Name  
2. Hold down C until the city code starts to flash. The city  
code flashes because it is selected  
.
3. Use A and B to scroll through the city codes until you  
find the one you want to set as your home city.  
B scrolls forward, while A scrolls back through city  
codes. Holding down either button scrolls through the  
city codes at high speed.  
If you do not operate any button for a few minutes while  
in the Data Bank Mode, the watch automatically goes  
back to the Timekeeping Mode.  
[
Remaining Memory Screen]  
See the “CITY CODE TABLE” at the back of this manu-  
al for a complete list of available codes.  
To input new Data Bank data  
1. In the Data Bank Mode, press B until the remaining  
Cursor  
4. Press D to change the selection in the sequence below.  
See “To switch between standard time and daylight saving time” for details on DST  
On/Off setting.  
memory screen appears.  
If the message  
appears on the display, it  
FULL  
means that memory is full. To store more data, you will  
first have to delete some of the data stored in memory.  
2. Hold down C until the flashing cursor appears on the  
display.  
DST  
City Code  
Day  
Seconds  
Hour  
Minutes  
On/Off  
A separator is input automatically between the last char-  
acter and the first character of the data.  
The NAME indicator appears when the cursor is cur-  
rently located in the text field.  
Month  
Year  
12/24-Hour format  
Separator NAME indicator  
5. While the seconds digits are selected (flashing), press  
B to reset the seconds to AA. If you press B while the  
seconds count is in the range of 30 to 59, the seconds  
are reset to AA and 1 is added to the minutes. If the  
seconds count is in the range of 00 to 29, the minutes  
count is unchanged.  
3. Use A and B to change the character at the cursor position in the text field. The  
character changes in the following sequence.  
Press  
Press  
.
.
(space)  
to  
to  
6. While hour, minutes, year, month, or day is selected (flashing), press B to in-  
crease the setting or A to decrease it. While the 12/24-hour setting is selected,  
press B to switch between the two formats.  
Holding down either button changes the current selection at high speed.  
When the 12-hour format is selected, the BCL indicator appears on the display.  
With the 12-hour format, the PM indicator appears on the display to indicate “p.m.”  
times. There is no indicator for “a.m.” times. Selecting the 24-hour format causes  
the CZL indicator to appear on the display.  
7. After you set the time and date, press C to return to the Timekeeping Mode (Home  
Time screen).  
The day of the week is automatically set in accordance with the date.  
The date can be set within the range of January 1, 1995 to December 31, 2039.  
If you do not operate any button for a few minutes while a selection is flashing, the  
flashing stops and the watch goes back to the Timekeeping Mode automatically.  
Holding down either button changes the character at high speed.  
4. When the character you want is at the cursor position, press D to move the cursor  
to the right.  
5. Repeat steps 3 and 4 until your text is complete.  
You can input up to eight characters in the text field.  
6. After you input a name, use D to move the cursor to the number field.  
The NAME indicator is cleared and the TEL indicator appears when the cursor is in  
the number input field.  
You can input up to eight characters for the name. After you input the eighth char-  
acter, pressing D causes the cursor to jump to the first digit of the number.  
You can input up to 12 digits for the number. After input the twelfth digit, pressing D  
causes the cursor to jump back to the first character of the name.  
7. Use A and B to change the character (space, number, or hyphen) at the cursor  
position in the number field. The character changes in the following sequence.  
Press  
.
(space)  
to  
Press  
.
Holding down either button changes the character at high speed.  
 
1934/1935-3  
CITY CODE TABLE  
City  
GMT  
City  
Code  
differential  
+9.5  
–09  
+01  
+07  
+02  
–04  
–06  
+06  
+5.5  
–07  
+04  
+10  
+08  
–10  
+02  
+03  
+02  
+4.5  
+05  
–08  
+00  
–06  
–05  
+01  
+05  
+11  
–05  
+01  
–11  
+6.5  
–03  
+01  
+09  
–08  
+08  
+10  
+3.5  
+09  
+12  
–08  
ADL  
ANC  
BER  
BKK  
CAI  
ADELAIDE  
ANCHORAGE  
BERLIN  
BANGKOK  
CAIRO  
CCS  
CHI  
CARACAS  
CHICAGO  
DHAKA  
DAC  
DEL  
DEN  
DXB  
GUM  
HKG  
HNL  
IST  
DELHI  
DENVER  
DUBAI  
GUAM  
HONG KONG  
HONOLULU  
ISTANBUL  
JEDDAH  
JED  
JRS  
KBL  
KHI  
JERUSALEM  
KABUL  
KARACHI  
LOS ANGELES  
LONDON  
MEXICO CITY  
MIAMI  
LAX  
LON  
MEX  
MIA  
MIL  
MILAN  
MLE  
NOU  
NYC  
PAR  
PPG  
RGN  
MALE  
NOUMEA  
NEW YORK  
PARIS  
PAGO PAGO  
YANGON  
RIO RIO DE JANEIRO  
ROM  
SEL  
ROME  
SEOUL  
SFO SAN FRANCISCO  
SIN  
SYD  
THR  
TYO  
WLG  
YVR  
SINGAPORE  
SYDNEY  
TEHRAN  
TOKYO  
WELLINGTON  
VANCOUVER  
*Based on data as of June 1998.  
*The GMT differentials used by this watch are  
based on Universal Time Coordinated  
(UTC) data.  
CHARACTER LIST  
(space)  
1
2
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
J
k
L
M
N
O
P
Q
R
S
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
T
U
V
W
X
Y
Z
^
1
2
31  
32  
33  
34  
35  
36  
37  
38  
39  
3
4
5
6
7
8
9
t
-
A
B
C
D
E
F
G
H
I
3
4
5
6
7
8
9
10  
 

Bloomfield Coffeemaker 2212 User Manual
Bosch Appliances Home Security System 20 User Manual
Bowers Wilkins Speaker CC3 User Manual
Cadillac Automobile 2009 Escalade EXT User Manual
Campbell Hausfeld Nail Gun IN703700AV User Manual
Canon Fax Machine FAX L380 User Manual
Chamberlain Home Security System BG770 User Manual
Chief Manufacturing Stud Sensor CTA 2536 User Manual
Chromalox Electric Heater PF421 6 User Manual
Cisco Systems Intercom System OL 12456 01 User Manual